year

BOARDWAY BUILDING MATERIAL(ZHANJIANG) CO., LTD.

Search This Supplers Products:PVC foam board manufacturerCustomizable plastic sheet supplierLeading manufacturer of Expanded PVC foam boardsWide range of plastic sheet solutionsHigh-quality customized plastic boardsTrusted China-based plastic sheet manufacturer

Home Categories Store home Product list PVC Concrete Formwork

Plastic Building Templates PVC Concrete Formwork Panel For Buildings Bridge Box Culvert

group name: PVC Concrete Formwork

Min Order: 100 sheet

brand name: Boardway Plastic Sheet PVC Foam Board Manufacturer

Nearest port for product export: Guangzhou, Shenzhen, Shanghai, Ningbo

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES

Acceptable payment methods: T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow

update time: Sat, 20 Apr 2024 07:08:56 GMT

contact supplier

Paramtents

Material Polyvinyl chloride, wood fiber
Custom specifications Length, width, thickness, density
Processing services Cut to size, cnc engraving, bending
Supporting services Sourcing, construction technical guidance
Packing method PE bag, carton, pallet
Transportation mode FCL/LCL by sea, air, road and rail

Packging & Delivery

Min Order100 sheet

Briefing

BOARDWAY™ PVC concrete formwork represents a reusable, waterproof, impact-resistant and cost-effective building formwork.

Detailed

PVC Concrete Formwork

PVC concrete formwork is an environmentally-friendly high-tech plastic composite formwork. It is mainly made of polyvinyl chloride, bamboo fiber or wood fiber, produced by extrusion foaming technology.

PVC formwork has great water resistance, heat resistance and dimensional stability, which can completely replace wooden formwork and avoid these shortcomings of wooden formwork. It is suitable for all parallel and vertical use, pillar, column, beam work, side wall, steps, elevator shaft, ladders of high-rise buildings, halls, bridges, viaducts, tunnels, etc.

As the number of reuses of PVC concrete formwork increases, the material cost decreases. Using PVC formwork can reduce the overall cost of a project by 3/5 to 1/2 compared to a project using wood formwork.

Product Details

According to different project quality requirements, we provide two types of PVC concrete formwork, they are common pvc concrete formwork and fair-faced concrete formwork. For projects that require high-standard fine finishes, the fair-faced pvc concrete formwork is strongly recommended.

It has a more glossy surface, stronger toughness and rigidity. The surface of poured concrete can have a fair-faced and smooth finish, eliminating the cost of polishing and plastering.

Common PVC Concrete Formwork

Fair-faced PVC Concrete Formwork

We are able to provide curved pvc concrete formwork for bridge construction.

Concrete Formwork For Bridge

The Use And Loading Of Curved Formwork

Advantage

Waterproof -does not swell, bend, or deform when exposed to water

Anti-corrosion -acid and alkali resistance, no corrosion

Weather resistance -can be used in cold, hot and humid environments

Nail-holding strength -tighten the screws without slipping

high impact resistant pvc concrete formwork

Good impact resistance -not easy to crack after being dropped or hit

Strong workability -can be easily sawed, drilled, nailed, planed by conventional tools

Cost efficiency -up to 30 times of repeated use, reducing engineering costs

Save labor and working hours -can be easily drilled, nailed, sawed, cut, planed, glued, sanded, painted

Good concrete surface -no mold release agent, no plastering

Fire performance -PVC formwork panel self-extinguishes away from the fire

Comparison

pvc concrete formwork vs plywood formwork

PVC Formwork & Plywood

We made a practical use comparison between plywood formwork and PVC formwork on our construction site.

The picture shows the use of plywood formwork and PVC formwork in the same building and at the same area.

Both formworks have been reused 6 times.

Formwork Performance	PVC Concrete Formwork	Plywood Formwork
Hardness	70 - 75 Shore D	Less than 30 Shore D
Flatness	Flat overall, slightly bent	The bending height is close to 2 cm
Surface	No damage on the surface, with small dent	The surface is damaged, especially near the edge
Corners	Good	The corners are cracked, not right angles
Expansive Deformation	No expansion	Expand and separated layer
Service life	Can continue to be used	Out of use

The concrete surface after demounding of the two formworks. The quality of concrete using PVC concrete formwork is much better.

The following pictures show the comparison of the appearance of concrete surfaces. Left: PVC formwork. Right: plywood formwork.

Concrete Appearance	PVC Concrete Formwork	Plywood Formwork
Concrete Color	The color of concrete can be uniform and beautiful without a mold release agent	A release agent must be used, otherwise the color of the concrete cannot be uniform
Wall	Overall clean and smooth	Rough with dirt and scratch, and uneven concrete
Ceiling	Tight joints, with only a little concrete overflow	There is excess concrete in the joints, need to be removed manually
Beam	Overall clean and smooth	Rough with dirt and scratch, and uneven concrete, especially at the junction
Pillar	Overall clean and smooth	The concrete at the junction is uneven, with concrete overflow or insufficient

Specification

Length

1830mm, 2440mm length can be customized

Width

915mm, 1220mm

Thickness

12mm, 15mm, 16mm, 18mm

Density

0.65 - 0.75 g/cm3

Surface

Smooth

Processing

Cut to size is available

Data Sheet

Testing sample: PVC concrete formwork, 18mm thick

Test Item	Method	Unit	Result
Density	ASTM D792	g/cm3	0.73
Hardness	ASTM D2240	Shore D	75
Water Absorption	ASTM D570	%	1.5
Flexural Strength	ASTM D790	MPa	26
Flexural Modulus	ASTM D790	MPa	1000
Tensile Strength at Yield	ASTM D638	MPa	30
Tensile Modulus	ASTM D638	MPa	1200
Elongation at Break	ASTM D638	%	15
Modulus of Elasticity	ASTM C1548-2	MPa	1600
Charpy Impact Resistance	ASTM D6110	KJ/m2	36

Construction Sites

Apartment Buildings (aluminum support structure)

Apartment Buildings (wood support structure)

Art Museum (using fair-faced pvc concrete formwork)

Elevated Bridge

High-speed Railway Station

Options For Customers

For formwork wholesalers

We are able to provide PVC concrete formwork of different grades, different thicknesses and different dimensions. The size, thickness and density can be customized according to your requirements. We accept mixed specification shipments.

For builders

We are glad to provide cut-to-size formwork according to your needs, such as 300x2450mm, 400x1200mm, 250x1200mm, 300x600mm, etc., to save labor costs on the construction site. If you need to purchase other accessories in China, such as structural parts, fasteners, tools, etc., we have resource advantages and are willing to help you purchase and ship.

For developers & general contractors

We can provide you with a complete construction plans according to your drawings. Including the calculation of the total usage of the pvc concrete formwork required by your project, so as to calculate the optimal material cost and comprehensive use cost budget.

If you have contracted part of the concrete formwork project, or all of the concrete formwork project, Boardway construction team is very willing to visit your construction site to provide you with on-site construction technology.

Want to know what processing services Boardway provides?

Learn More